HONING FACIILTY:
- Our Honing Facility is 1480 Sq. Ft.
HONING SPECIFICATIONS:
- Inside Diameters Range From: – .090″ through 4.000″
- Maximum Length: – varies with diameter
- Standard Tolerances: – We can hold as close as .0001″ or your needed tolerance.
- Controlled Surface Finish: – We are capable of holding micro finish tolerances according to your specifications and can produce as fine as a 2 Ra in most materials.
EQUIPMENT:
All Machines are Manufactured by Sunnen Products Company
| 1 | Vertical Sunnen Honing Machine | CV616 |
| 1 | Horizontal Sunnen Honing Machine | MBB1660 |
| 1 | Horizontal Automatic Sunnen Honing Machine | ML-2000 |
| 1 | Horizontal Automatic Sunnen Honing Machine | MBB 1804 |
| 1 | Horizontal Automatic Strocker Sunnen Honing Machine | MBB1690 |
GAGES:
All Gaugues are Manufactured by Sunnen Products Company
Mechanical gauges include PG-700 & PG-800 along with dial bores
All masters are traceable to National standards
All American Hone follows ISO standards for calibration
| 3 | Sunnen Precision HoleGage Diameter range from .370″ through 1.500″ |
PG-800-S |
| 1 | Extension finger set for PF-800-SGage Diameter range from 1.500″ through 2.900″ |
PG-250-E |
| 1 | Sunnen Precision Small Bore Gage Gage fingers ranging from .090″ through .330″ |
PG-700-E |
| 1 | Sunnen Precision Small Bore Gage | PG-710-E |
| 1 | Dial Bore Gage Diameter range from 0.054″ through 0.535″ |
GR-3000 |
| 1 | Dial Bore Gage Diameter range from 0.495″ through 0.750″ |
GR-3000 |
| 1 | Dial Bore Gage Diameter range from 0.740″ through 1.190″ |
GR-6000 |
| 1 | Dial Bore Gage Diameter range from 1.180″ through 2.000″ |
GR-900 |
| 2 | Dial Bore Gage Diameter range from 2.000″ through 6.125″ |
GR-2000 |
| 1 | Set-Master Range from 0″ through 2.500″ |
PG-400-E |
| 1 | Dial Bore Set-Master Range from .054″ through 2.000″ |
CF-502-M |
| 1 | Dial Bore Set-Master Range from 2″ through 6″ |
CF-1136 |
| Certificate of Calibration provided by: Sunnen Products Company on all Set-Masters Calibrated using the applicable N.I.S.T. traceable equipment listed on certificates on premises and they have been found to be in accordance with INTERNATIONAL STANDARD I.S.O. 100012-1 | ||